Skip to main content

Project Proposal Drafting

Project proposal was sent out to us on 18th October 2017 and the dateline will be 25th October 2017. Due to our timetable availability, we have decided to do it together via web on 21st October, which is today. Google drive was set up to serve as a platform for us to live update the document together. In additional, our project documents will also be uploaded there.
At the start, each of us tasked ourselves with the sections that we were most confident in filling up. The proposal was categorized as follows:
1. Document Control
2. Executive Summary
3. Introduction
4. Project Description
5. References

The process turns out to be good as we completed almost 70% of the proposal. We scheduled to continue the project proposal together on the Tuesday, 24th Oct in school.

Comments

Post a Comment

Popular posts from this blog

Progress update on our current status - Prototype and Documentation

After all the core functions are working, we consolidate and complied everything together and test the program to see if everything is working fine. With that, we will continue to debug if there is any. Most of the documents are also complete, we will just need to touch up a bit and consolidate for the next few days. We will start to do videoing when everything is done.
Post a Comment
Read more

Progress update on our current status - Testing Reports and Prototype

We gathered to continue to update our progress and do the testing for our prototype. Things that we are looking at: =========================== - Basics requirement of the computer side install software : detect the key, pull out usb, autorun [ In progress - by Tuesday ] - GUI customization (user-friendly) [ Done ] - Encryption addition (OTP, AES-RSA) [ In Progress ] - Progress bar [ In Progress ] - Password restrictions  - at least 8 alphanumeric [ Done ] - OTP [ In Progress ] - Reset programs when done [ In Progress ] - Mesh GUI [ In Progress ] - DOD wipe when threshold [ In Progress ] We do our basic testing of our prototype and update the testing logs accordingly for the results.
Post a Comment
Read more

Progress update on our current status - Prototype and Documentation

We left two weeks to the submission of the FYP project, which is on the 24th Feb 2018. We gathered today and start to get the documentation updated with the prototype we have. We tested all the GUI functionalities to check if they are working properly as intended. Most of the Core functions are working. The remaining task were spilt up to each member. Hope we can get everything done correctly and start to prepare for our presentation!
Post a Comment
Read more